“Hand tapping is literally easier, and my thread finish is really nice — my tapped hole thread quality is much better than the bolts that go in them.”

"I just tried the tapping fluid. I’m machining CPM-M4 HSS Die engraving text… Tool wear is like I never seen before!!! Until I tried this oil!!! Thank you so much!!!"

“We love this coolant! It even cleans the workers' hands! We're 60% finished converting all the machines and the guys are fighting over whose machine is next!”

“I am ready to order another 5 gallons of coolant. The current coolant is still running well and is coming up on a year in the sump with no issues. I have just been topping it off and monitoring the concentration."

“Our machine with the robot has been changed out — we are very satisfied with the results so far. Our shop air quality is fantastic vs. before the change.”

“It seemed to work great on the first job we did turning & milling 41L40 steel. The job ended before we had to change any tooling, but the roughing end mill would normally have had to have been changed halfway through, so on that tool we got a 100% increase in tool life, and we were running 10% higher surface speed & 50% higher feed rate.”

“The coolant is working very well. It seems to be pulling more and more debris out of the inside of the machine and other systems. The inside of the machine is noticeable cleaner each day which is a nice bonus for us. So far all the tooling seems to be performing very well.”